All Categories
EN
Low ESR Product

Home > Products > Liquid Aluminium Electrolytic Capacitors > Low ESR Product

微信图片_20240108091029_副本

RM Series Super Long Life High Reliability Product 105℃ 10000Hrs


Application:Suitable for high temperature, high reliability electronic circuit.

Features:

Operating Temperature Range

-40~105 Deg

Rated Voltage Range (VDC)

10~100Volts

Load Life Range

10000Hrs

Nominal Capacitance Range

1~470uF

Nominal Capacitance Tolerance

±20% (at 25℃ 120Hz)


Specifications
项目Item特性Characterlstics
工作温度范围
Operating temperature range
-40~+105℃
额定电压范围
Rated voltage range
10~100V
标称容量允许偏差
Nominal capacitance tolerance
±20%                                                                                                   (at 25℃ 120Hz)
漏电流
Leakage current
=0.01CV或3μA取大者
1=0.01CV or 3μA
Whichever is greater
25℃,2分钟(25℃,2min)25℃,120Hz25℃
l:漏电流
l:Leakage current
C:标称容量
C:Nominal capacitance
V:额定电压
V:Rated voltage
损失角正切值(tanō)
Dissipation factor
额定电压(Vs)Rated voltage101625 355063100  at 25℃ 120Hz
anō(Max)0.450.350.300.220.190.170.15
当容量大于1000μF时,容量每增加1000μF,tanō增加0.02
Capacitance>1000μF:tano increases by 0.02 for each 1000μF from below value
温度特性
Temperature characteristics
额定电压(Ve)Rated voltage101625 355063100   at 120Hz
阻抗比MaxZ(-25℃)/Z(+20℃)864 4333
Impedance    ratio|Z(40c)Z(+20c)13108 8
77
耐久性
Load life
在105℃环境中,连续加载直流电压与额定纹波电流规定时间(10000H)后,待产品温度恢复到25℃进行测量时,应满足以下要求:
In the environment of 130℃,after continuous loading of DC votage and rated ripple current for specified time(10000H),the product shall be
tested after its temperature back to 25℃,and following requirements should be met:
容量变化
Capacitance change
≤初始值的±30%
s±30%of the initial value
损失角正切值
Dissipation factor
≤初始规格值的300%
≤300%of the initial specification value
漏电流
Leakage current
≤初始规格值
Sthe initial specification value
高温贮存
Shelf life
在105℃环境中,无负载放置1000小时后,待产品温度恢复到25℃进行测量时,应满足以下要求:
In the environment of 105℃ with 1000 hours of no load,the product shall be tested after its temperature back to 25℃,and following
requirements should be met
容量变化
Capacitance change
≤初始值的±30%
s±30%of the initial value
损失角正切值
Dissipation factor
≤初始规格值的300%
≤300%of the initial specification value
漏电流
Leakage current
≤初始规格值300%
≤300%of the initial specification value


Diagram of dimensions

RM_Sheet2



Frequency correction factor for RC
Freq(Hz)
Cap(pF)
1201k10k100k
Cap<220.420.600.801.00
22≤Cap<470.550.750.901.00
Cap2470.700.850.951.00


List of standard products
电压
WV (Vdc)
容量
Cap (μF)
尺寸
Size D*L(mm)
tanδ额定纹波电流(mA)
Rated ripple current
101005* 110.45135
2206.3*120.45220
3306.3*120.45240
4708* 120.45300
16475* 110.35135
1006.3*120.35220
2206.3*120.35240
3308* 120.35300
25335* 110.30135
475* 110.30145
685* 110.30150
1006.3*120.30240
35335* 110.22135
475* 110.22145
1006.3*120.22240
2208* 120.22300
5015* 110.1925
2.25* 110.1935
3.35* 110.1960
4.75* 110.1980
105* 110.1990
225* 110.19110
336.3*120.19220
476.3*120.19240
1008* 120.19300


电压
WV (Vdc)
容量
Cap (μF)
尺寸
Size D*L(mm)
tanδ额定纹波电流(mA)
Rated ripple current
63105*110.1790
226.3*120.17180
336.3*120.17220
478*120.17260
10010*130.17300
10015*110.1535
2.25*110.1560
3.35*110.1580
4.75*110.1590
105*110.15110
228*120.15240


Description
INQUIRY

Service Line

+8615399723311

Worktime:8:00 ~ 17:00

ENQUIRE NOW

close
Enquire Now